This clamp rack is specifically intended for safe storage of bar-type clamps when not in use. It is not designed to hold pipe,quick grip, beam style clamps or any othe objects.

Mount clamp rack suffciently above floor and othe objects, allowing stored clamps a minimum 2" clearance. Use 1/4" lag screw fasteners with a minimum engagement of 2" into building structure or use 1/4" bolt fasteners wher back side is accessible.

When placing clamp onto rack, ensure the clamp is fully engaged in the chosen slot. Recommened maximum load 60 lbs.

The BIGfoot clamp bar is constructed of super lightweight aluminum for easy handling. Our specially designed base is extra wide for great stability when clamping your stock. An easy to turn handle is rasied to clear your work surface so you won't scrape you knuckles while roating.

The BIGfoot aluminum bar clamp is available in four convenient sizes: 24" - 36" - 48" - 60" clamping between clamp jaws.

Soft Grip handle is larger and more ergonomic, allowing high clamping pressure with less effortt. I-beam bar reduces
flexing and bowing. Larger, heavy duty clutch plates allow for easier release and increase maneuverability of the clamp head, as well as making the clamp even more dependable and durable.

• Soft-Grip handle is larger and more ergonomic, allowing high clamping pressure with less effort
• I-beam bar reduces flexing and bowing 35%
• 5" throat depth

These light-duty style bar clamps have a 2” reach. Used for light-duty clamping, a workhorse for its size and design. Use in hobby-craft, light-duty woodwork, home-shop and do-it-yourself projects. Features: 2” reach, 5/8” X 3/16” plated bars, round-edge, high-carbon steel. 5/16” cold-drawn steel screws orange baked enamel finish malleable iron castings hardened, plated, high carbon steel multiple-clutch-discs 3/4” diameter swivels, solid maple handle, 2 soft durable plastic pads press fitted and riveted fixed-heads.

Ideal for sheet metal, stainless steel, light-duty work, and woodworking applications, these Bessey clamps are the choice of professionals worldwide. Tradesman bar clamps feature a unique locking device that is permanently molded into a malleable cast-iron sliding arm, eliminating slippage by interlocking with serrations on the rail. These clamps need no clutching action and have a large Acme thread for fast turning. The large-diameter pad surface comes with protective caps that will minimize dimpling of material while protecting the surface while the ergonomically designed wood handle gives you positive strong clamping.

Bessey K-Body Revo™ Clamp

The K Body® is a clamp designed to remain parallel when pressure is applied. The K-Body® is considered by manyto be the best parallel clamp in the industry for a variety of reasons. First, it is always at 90 degrees, and has a verylarge clamping surface. The K-Body® also has a glue resistant surface and enables a woodworker to achieve 1100 lbs of nominal clamping force. You can also use the K-Body® as a powerful spreader!

A new mini version of the popular K Body Clamp. The UniKlamp offers of 11 square inches of jaw surface: clamps flat, round or odd shapes; jaws encased in glue resistant, non-marring polyamid; profiled rail minimizes flexing and bending; Acme thread for smooth action and long life. Jaws reverse to use clamp as a spreader. Clamps exert 550 pounds of pressure. Available in 6"and 12" opening sizes.

The rail is made of quality steel drawn in a single piece for durability and strenght. The U-shape of the rail enables step-over clamping so you can get to those hard-to-reach places.

The sliding arm is made of die-cast zinc. It is light, stable and break-resistant.

• Small and very handy
• Low weight
• Comes with two plastic pressure caps
• Universally applicable

Our Heavy duty F-clamp is built with a zinc plated steel
bar and cast steel head / jaw. The handle has a soft grip
for more grip and better clamping force. Removable
pads provide grip on work surfaces and reduce work
piece marring. Grooves in the serrated bar allow easier
sliding of moving jaw.

Ever have a project that requires an 80” long clamp? You don’t have to invest all that money on a clamp that you will only use once. If you already own Kbody ® clamps then this is a must have item for your workshop. The Extender will allow you to take any two K-body® clamps and turn them into one long clamp. Example: two 40” clamps will make one 80” clamp! Durable construction with no loss of strength or clamp parallelism. The Extender does not interfere with the top edge of the bar, allowing your stock to stay nice and flat during glue up. The K-body® Extender is perfect for large, oversized glue ups.

KP Framing blocks greatly simplify clamping set-up. Designed to hold clamps upright and at approximately 90° to each other, they increase stability and reduce frustration. For use with any size of K-Body or Cabinet Master clamps (not included), they facilitate quick, easy and square clamping for assemblies such as raised panel doors, cabinet carcasses, and drawers. The glue-resistant blocks are glass-fiber and can be screw-mounted to a work surface to create a gluing fixture.

The Corner Pressure Clamp applies pressure on the sides of your stock to corners together. Both will accept any clamp bar up to 1/4" thick.

With the Perpendicular Pressure Clamp you can apply vertical downward pressure on your stock to keep it from moving or popping up.

Our parallel-jaw bar clamps are for quick, accurate clamping of panels, cabinet drawers and frameworks. The end stop on the steel bar helps stabilize the clamp during use and detaches to reverse the screw jaw for spreading purposes. The comfortable screw handle is super durable compound material.

Parallel Clamp Blocks are packaged 4 to a set. They are used with four Parallel clamps (not included) for quick, easy and perfectly square set-up for projects like raised panel doors, entrance doors, cabinets, window frames, picture frames, boxes

These F-clamps have a 2-3/4” reach. Used by home crafters, cabinet-makers, and woodworkers alike. These easy to open and close clamps are suitable for “close quarters” clamping. The Multiple- Disc-Clutch holds securely at any point along the steel bar of the clamp. Over 500 lbs. of clamping pressure.

The deep throat clamps have a 5” jaw depth for when you need a little extra reach. Heavy duty cast iron jaws. Zinc
plated 1-1/8" wide bar for smooth operation. Wooden handle with ACME- type threads for maximum holding power. Over 800 lbs. of clamping pressure.

Every shop needs at least two of this style of clamp. The extra deep throat clamps have a 7” jaw depth for those hard to clamp projects. Heavy duty cast iron jaws. Steel 1/8" thick by 1-1/8" wide bar for smooth operation. Large easy to grip handle with 1/2" ACME- type threads for maximum holding power. Over 1000 lbs. of clamping pressure.

Our 4 Way Clamping System applies equal pressure from all four directions (top, bottom, and both sides). Ideal for gluing table tops, shelving, veneer, and laminates. Attach clamps to any length 2 x 2’s with screws provided, set jig and turn handle to tighten. Clamp has plastic pressure pads and two 19-1/2” tail bars of tough plastic with 12 notches to handle a variety of stock widths. Wood is not included.

This extremely sturdy original BESSEY one-handed clamp EZS is perfect for all work that needs to be carried out with one hand - overhead tasks, or if the other hand is needed for aligning purposes. Clamping force up to 445 lbs. Converts to spreader without tools. Intelligent release mechanism in upper section Ergonomic 2-component plastic handle behind the rail. Soft pressure caps provide material protection and secure clamping.