This Drill Press Clamp adjusts quickly and easily to lock your work piece in any position. The clamping pad pivots to conform to any work piece, ensuring uniform pressure. Table top must have hole through slots in order for clamp to work properly.

The post quickly mounts to most drill press tables .On the drill press a bolt passes through the table and is secured with a large ring nut. Hardware is also provided to be used in 3/4" hole on your workbench to secure stock . Hold down pressure is provided by the cam action clamp on the head which features a 1-1/2" dia. rubber foot to help prevent marring your work piece.

• Exclusive Quick - Set & Rrelease Hold Down
• Fits 3/8" or larger through slots or holes.
• Can be used on Workbencehes.
• Rubber Clamps Foot prevents marring.
• Hold Down Capacity of 4-3/4"

Position the hold down anywhere you can supply a 3/4" hole. The wedge mount allows you to tighten the holdown into the mounting hole when the thickness of the mounting surface is 1" and thicker, which is perfect for most workbenches. For surfaces like standard drill press tables, remove the wedge mounts and thighten into position with ring nut. Either mounting methed provides a secure mount to hold any material in place.

• Exclusive Quick - Set & Rrelease Hold Down
• Fits 3/8" or larger through slots or holes.
• Can be used on Workbencehes.
• Rubber Clamps Foot prevents marring.
• Hold Down Capacity of 4-3/4"

This rubber pad replaces the standard pad furnished with
the Quick Set Drill Press Hold Down (shown above #3339). It provides more surface area to help hold your work piece . The Quick Set Large Foot has a 1-1/2" long 5/16" stud with 16 threads per inch. The hold down pad is 2-3/8" x 1-5/8" with V-grooves for holding round stock.

The Large Quick Set Hold Foot can also be use with Large Toggle Clamps with 5/16" studs.